The original Model A frame is a simple, effective design well suited to performance improvements for street rodding. Our chassis maintains the stock dimensions, but modifications our possible depending on your build ideas. We generally recommend kicking up the rear crossmember a minimum of 3” to enhance the car’s rake, and lower the ride-height of your body. This gets your A down for a proper street rod stance but will require cutting the floor in your body.

Another popular option for the Model A bodies is to mount it to a slightly-modified ’32 Ford chassis. Please see the 1932 Ford chassis section for details and pricing for this chassis.

Our technical staff will discuss your ideas and goals with you to determine the best combination of components for your project. We offer a well-equipped Complete Rolling Chassis to use as a starting point, optioned a follows:

• Perimeter Frame – Ford Model A

  • 2”x3” boxed steel frame rails

  • tubular cross members

  • motor mounts and removable tranny mount, per your spec

  • rear frame section will be kicked up 3” and rear crossmember will be built over top of the axle housing. Modifications to your floor will be required.

• Front Suspension – choice of:

  • Kugel Komponents Phase I Independent Front Suspension, including:

    • tubular A-arms, billet coil over shocks, disc brakes sway bar, rack and pinion steering

OR

• TCI solid, dropped-tube front axle package, including:

  • Disc brakes, shocks, transverse leaf spring, Vega steering box - complete

• Complete rear suspension, including

  • Triangulated 4-bar with QA1 or Alden coil over shocks

  • New Currie Ford 9" housing (no 3^rd member)

  • New Dutchman axles

  • Wilwood 12” rear disc brakes with integral parking brake

• Brake Package, including:

  • master cylinder, mounting bracket, and brake pedal

PRICE: $9,200

Additional Options

• Kugel Komponents IFS options

  • Phase I IFS, with stainless steel a-arms - $300

  • Phase II IFS, with CAST stainless steel a-arms - $400

  • Polish and Chrome Show option for either of the above, $600

  • Power rack and pinion steering - $250

• TCI solid front axle options:

  • Chrome front shocks - $35

  • Chrome front tube axle - $250; Chrome Superbell I-beam axle - $350

  • Chromed Hairpins - $125

  • Front axle Chrome Package – everything chromed - $1000

  • Front axle Show Package Upgrade for axle front end - $1800

    • replaces chrome rods with stainless steel

    • replaces GM calipers with polished Wilwood units

    • stainless pitman arm

  • Unisteer Cross-Steer rack and pinion steering - $100

• Polished stainless rear 4-bar with chrome springs - $225

• Currie Ford 9” 3^rd member - $850-$1100

• Steel brake lines installed with residual valves, brake light switch, and Earls braided lines to calipers - $525

• Chassis powder coat (includes rear axle and misc brackets) - $900

Many other options are available, so ask if you are interested in something you don’t see. Please contact our technical staff to discuss your project and we’ll put together a custom quote for your chassis.