Order by Phone:
Chevy Car Fiberglass
Chevy Truck Fiberglass
Other Makes/Universal Fiberglass
2014 trends...click to read our observations
Follow our latest projects...
Street Rod Bodies
1934 Chvey 3-Window Coupe High-Boy Roller
Click photo to zoom and open slide-show
While Ford's Deuce gets all the attention, many feel the 1934-1935 Chevrolet Standard Coupe has better lines, and of course, a Bow Tie graces its hood. Our body is built to stock dimensions and is available in the original, stock height or a 3-inch chop. Several different hood and grill treatments are available, including our new laid-out grill shown below on the orange high-boy.
Our fenderless, 'high-boy' roller mates our hand made body to a custom chassis also built at our facility. We can use our reproduction ’34-'35 Chevy chassis, but we recommend using our reproduction ’31 Chevy chassis when going fenderless which has nice straight rails and an attractive front frame horn. The ’34 chassis, left in its stock form, is not particularly attractive when the fenders are removed. We can talk this through as needed when finalizing the specs for your custom build. The pricing and spec for either frame will be the same as listed below.
There are several choices of suspension styles and frame customizations depending on the look you are going for, and most of those options are listed below. Once your chassis has been built we then assemble your body directly on it rather than using a fixture. This insures that the body is precisely fit to the chassis it will live on and yields better door fit and gap alignment.
Our body is hand-laid in our facility using 3 layers of 1.5oz fiberglass mat plus stiffening core mat added to most panels. We then add a comprehensive steel structure inside the body, install the doors and decklid, install the power windows, and deliver to you a body ready to bolt down to your chassis. It includes the following:
3" Chop or Stock height
Body from the cowl back with firewall, floor, garnish moldings, doors and deck lid (hinged and mounted.
Power windows, with glass, installed. Rear glass provided but not installed.
Steel inner structure installed at firewall, dashboard, door posts, and throughout interior of body.
Hood, forward-tilt hood hinge kit, hood side
Grill shell (original; smooth-top; molded trim band; or laid-back available) with polished grill insert, installed
Finished in a glossy, black gelcoat ready for block sanding and paint.
Additional Body Options
Air conditioning unit, installed under dash - $600
wer wipers, installed - $500
wer door locks installed, both doors - $200
External locking door handles installed
, both doors - $300
installed to rack with drop, u-joints, etc.
Ididit paintable steel, tilt - $950
Ididit chrome, tilt, column shift - $1275
Flaming River polished stainless steel, tilt, column shift - $1275
Blockhugger Headers – recommend when we install steering column.
Small block Chevy plain steel - $200; ceramic coated silver - $360 (others available)
Polished cast aluminum headlight stands, pair - $230
Aluminum Radiator, installed, with fan, shroud, A/C condenser, and controls, installed - $1000
Channel body 1.5” - $200
Channel body 4" at firewall and 3” at rear of body (to level and hide frame).
Includes custom floor, door sills, tranny tunnel, and hood sides - $750
High-Boy Complete Rolling Chassis
10 gauge steel frame rails, fully boxed
motor mounts and removable transmission drop-out installed (to your spec)
tubular X-member or K-member center section
Front Suspension – your choice of:
Pete and Jakes dropped axle front-end with Vega steering box OR Kugel Komponents IFS with rack and pinion steering
Both are complete hub-to-hub with all steering arms, rods, etc. and disc brakes
Complete rear suspension, including:Triangulated 4-bar with QA1 or Alden coil over shocks
New Ford 9" housing, no 3rd member
New Dutchman axles
Wilwood 12” rear disc brakes with integral parking brake
Power Brake Package, including:
Dual power booster/master cylinder, mounting bracket, and brake pedal
Addition Chassis Options
Solid front axle options:
Chrome front shocks - $35
Chrome front tube axle - $250; Chrome Superbell I-beam axle - $350
Chromed Hairpins - $125
Front axle Chrome Package – everything chromed - $1000
Front axle Show Package Upgrade for axle front end - $1800
replaces chrome rods with stainless steel
replaces GM calipers with polished Wilwood units
stainless pitman arm
Unisteer Cross-Steer rack and pinion (replaces Vega box) - $100
Kugel Komponents IFS options:
Phase I IFS, with stainless steel a-arms - $300
Phase II IFS, with CAST stainless steel a-arms - $400
Polish and Chrome Show option for either of the above, $600
Power rack and pinion steering - $250 ($350 for chrome)
Rear Suspension Options
Polished stainless rear 4-bar with chrome springs - $225
Kugel Komponents Independent Rear Suspension – starting at $3750
brake lines installed with residual valves, brake light switch, and
Earls braided lines to calipers - $525 ($850 in stainless)
New Ford 9” 3
member, Posi/Tru-Trac - $1100
Chassis powder coat (includes rear axle and misc brackets) - $1200
If there is an option you want but don't see listed, just ask! Each Complete Rolling Package is custom built to your specs, and we will take the time to discuss your needs and wants to put together the best mix of components that will insure your satisfaction. If you have seen it at a car show or in a magazine, we can do it!
1934 Chevy Coupe Body
Superior 54 Sport Wagon Complete Rolling Package
Superior 54 Sport Wagon Body
STREET ROD BODIES
STREET ROD CHASSIS
TECH SUPPORT LINE:
PO BOX 1140
MULINO, OR 97042
31816 S. ONA WAY
MOLALLA, OR 97038
Street Rod Body FAQs
Street Rod Chassis FAQs
Privacy & Security