Order by Phone:
Chevy Car Fiberglass
Chevy Truck Fiberglass
Other Makes/Universal Fiberglass
Follow our latest projects...
at this time.
Rod and Race Parts
1937 Chevy car grill, polished stainless
Click photo to zoom and open slide-show
A unique and aggressive look that takes its style from the original 1937 Chevy grill design. Laser cut from 10g stainless steel and polished to a high luster. Includes mounting tabs. Will fit original steel or our reproduction fiberglass grill shells.
This grill insert has been trimmed to fit the original grill shell for your early Chevrolet car or truck. Superior Glass Works also manufactures reproduction fiberglass grill shells which these inserts will also fit. Installation is as follows:
ORIGINAL STEEL GRILL SHELL The insert will mount using the original hardware. Installation will vary depending on the exact model, the condition of your grill shell, and any modifications that have been made. Some minor trimming may be needed for a perfect fit. If so, use a small cut-off wheel or heavy tin snips.
GRILL SHELL Our reproduction grill shells do not have any hardware attached for mounting the grill shell and some fabrication is required. The methods will vary depending on your skills and personal prefere
To install the insert, a mounting surface must be created in the back of the grill shell.
Our recommended method is to bond 1/8”-1/4” thick plate into the back of the grill shell where the edges of the grill insert will touch.
Use a product made for bonding metal to fiberglass, such as Duraglass, Long and Strong, or 3M body panel adhesive. Once these plates are set in place, drill and tap holes for small bolts to secure the insert into th
e back of
the grill shell.
You can also affix studs to these plates and secure the insert with a bolt. Som
e minor trimming may be needed for a perfect fit. If so, use a small cut-off wheel or heavy tin snips.
BE CAREFUL - the edges are VERY SHARP!!!
Grill shell, Stock, for 1935 Chevrolet Master
Running boards,2" wider, for 1934 Chevy Master
Rear fender, right, 1932-1933 Chevy car & pickup
Grill shell w/Trim Band for 34-35 Chevy Standard
Running boards,stock, for 1934 Chevy Master
Stamped frame rails for 1932 Ford.
Front fender,right, for 1935 Chevrolet Master
Front fender, Right, 1934-35 Chevy Pickup
STREET ROD CHASSIS
TECH SUPPORT LINE:
PO BOX 1140
MULINO, OR 97042
31816 S. ONA WAY
MOLALLA, OR 97038
Street Rod Body FAQs
Street Rod Chassis FAQs
Privacy & Security